Electrical Glove Testing - Ensuring Engineer's Safety

1. Inspection of the gloves: The gloves are visually inspected for any defects, such as cuts, tears, or punctures. If the gloves fail this inspection, they must be discarded and replaced.

2. Air Inflation Test: The glove is inflated with air to check for any leaks and defects. The air pressure is increased to simulate the gloves' use under high voltage conditions and to ensure they can withstand the pressure.

3. Water Leak Test: The gloves are filled with water to check for any leaks or punctures that may not have been detected during inspection. This test ensures the gloves are watertight and can withstand rainy conditions.

4. Dielectric Test: The most critical part of the testing process is the Dielectric test. This test involves the use of a high voltage tester that sends an electric current through the gloves. The gloves are checked for any current leakage or failure.

5. Certification: Once the gloves pass all the tests, they are certified and deemed safe for use in high voltage applications. They are labeled to indicate a clear specification and compliance with the protective equipment standards.

HYJYX-HI insulated boots (gloves) voltage test device (automatic) using automatic up (down) pressure, automatically read the leakage current of each subject, the whole process is fully automatic, automatic printing test data, effectively solve the past irregular test method, thus simplifying the test procedures, improve the test speed. More reliable identification of insulation boots (gloves) leakage current, power frequency withstand voltage and other parameters. It ensures the safety of test workers and is an ideal special equipment for insulating boots (gloves). Its main features: it can test 3 pairs of insulating boots (gloves) at the same time, and can read the leakage current of each, and accurately judge the unqualified insulating boots (gloves); The bottom of the structure is equipped with casters, which can be moved at will.